塑料酸洗槽的工作原理

Working principle of plastic pickling tank

塑料酸洗槽

Plastic pickling tank

的工作原理(1)外部類型計量罐:總量4 m3塑料酸洗槽(3英寸)長桿式泵安裝在注漿泵,通過注漿管連接到井口防溢管(油管)。

Working principle of (1) external type of metering tank: a total of 4 m3 plastic pickling tank (3 inches) long rod pump is installed in the grouting pump, which is connected to the wellhead anti overflow pipe (oil pipe) through the grouting pipe.

泥漿罐上的入口有兩個,分別連接到振動篩緩沖池(補液口焊接方向的通道振動篩上的槽附近,并安裝控制門,月經是100毫米),除砂器進液管接頭(除砂器進液管上的補液口焊接向計量槽,并安裝控制門),泥漿出口(液體出口焊接向循環槽罐,并安裝控制閥,月經是100毫米),測量量表。

There are two inlets on the mud tank, which are respectively connected to the vibration screen buffer pool (near the groove on the vibration screen in the welding direction of the filling port, and the control valve is installed, the menstruation is 100mm), the liquid inlet pipe joint of the desander (the filling port on the liquid inlet pipe of the desander is welded to the metering groove, and the control valve is installed), the mud outlet (the liquid outlet is welded to the circulation tank, and the control valve is installed, the menstruation is 100mm), and the measurement is carried out Gauge.

鉆時需要填入泥,將開始灌漿泵計量罐泥漿通過井筒內的管道,然后通過測量標尺刻度可以讀取泵體積數據。鉆井時,井筒作為回報的泥漿,泥漿出口通過安裝在振動篩緩沖池,將井筒泥漿注入計量槽,然后通過測量標尺刻度可以讀取返回污泥體積的數據。當注入井筒內的泥漿,計量柜如果沒有泥,從除砂器砂泵循環泥漿罐槽,來補充計量罐泥漿

When drilling, the mud shall be filled in, and the mud in the metering tank of the starting grouting pump shall pass through the pipeline in the wellbore, and then the volume data of the pump can be read by measuring the scale scale. When drilling, the wellbore is used as the mud in return. The mud outlet is installed in the shale shaker buffer pool to inject the wellbore mud into the metering tank, and then the data of the returned sludge volume can be read through the measurement scale scale scale. When mud is injected into the wellbore, if there is no mud in the metering tank, the mud in the metering tank will be supplemented by circulating the mud tank from the desander sand pump

在井口返回鉆井泥漿罐時,例如塑料酸洗槽完全打開排出閥,多余的泥泥罐。

When the wellhead returns to the drilling mud tank, for example, the plastic acid pickling tank completely opens the discharge valve and the redundant mud tank.

2周期原始計量槽罐:錐形槽,需要每個團隊基于匹配可以計算總量。塑料酸洗槽已經安裝在料液泵、灌漿泵。與外部類型。

2 cycle original metering tank: tapered tank, each team is required to calculate the total quantity based on matching. The plastic pickling tank has been installed in the feed pump and grouting pump. And external types.

的工作原理

How it works